![background image](http://html.mh-extra.com/html/amx/dvx-21xxhd/dvx-21xxhd_webconsole-and-programming-manual_2937827110.webp)
Appendix A: LDAP Implementation Details
110
NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide
ICSP Connectivity Security Example
If ICSP connectivity is enabled, a valid username and password is required to communicate with the NetLinx Master via an ICSP
connection (TCP/IP, UDP/IP and RS-232). This is used with communication amongst various AMX hardware and software
components.
User Access
LDAP Server Configuration
Master Configuration
An ICSP user should be configured for a specific Master and
should be set up as a normal user.
Example:
dn
: uid=ICSPUser,ou=people,ou=Dallas, dc=example,dc=com
objectClass
: inetOrgPerson
objectClass
: organizationalPerson
objectClass
: person
objectClass
: top
cn
: ICSP User
sn
: User
uid
: ICSPUser
userPassword
: password
Note: The DN of this user must be added as a member to the
administrator groupOfNames objectClass on the server.
1) On the
System Security Details
page, disable LDAP by clearing the
LDAP
Enabled
checkbox and disable ICSP Connectivity by clearing the
ICSP
Connectivity
checkbox.
2) Click the User level tab and navigate to the User Security Details page.
3) Create a new user by clicking
Add New User
.
4) Enter the User name and password as set up on the LDAP server (for
example: ICSPUser and password).
5) Set all Access privileges.
6) Click the
Accept
button to complete adding the new user.
7) Return to the
System Security Details
page, and enter the common
name (cn) of the groupOfNames objectClass that contains the
member DN of the ICSP user that was just configured, and enable
ICSP Connectivity, Encrypt ICSP Connection and LDAP by clicking on
the appropriate checkboxes.
Note: If there is a mismatch with the username or password, the AMX
hardware or software component will not be allowed access. If there is a
mismatch with the access privileges, the master will use the privileges
value stored on the server.