![background image](http://html.mh-extra.com/html/amx/dvx-21xxhd/dvx-21xxhd_webconsole-and-programming-manual_2937827090.webp)
Terminal (Program Port/Telnet) Commands
90
NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide
Terminal Commands (Cont.)
Command
Description
PASS [D:P:S or NAME]
Sets up a pass through mode to a device. In pass through mode, any string received by the device
is displayed on the screen, and anything typed is sent as a string to the device. The device can be
on any system that the Master you are connected to is able to reach. You can specify the device
number, port, and system, or the name of the device that is defined in the
DEFINE_DEVICE
section
of the program.
• Mode is exited by ++ ESC ESC.
• Display Format is set by ++ ESC
n
Where
n
=
A
, format = ASCII
D
, format = Decimal
H
= Hex
Note: Refer to the ESC Pass Codes
for detailed descriptions of the supported
pass codes.
Example:
>pass[5001:7:4]
Entering pass mode.
PHYSICAL STATUS
Retrieve the current LED states.
PING [ADDRESS]
Pings an address (IP or URL), to test network connectivity to and confirms the presence of another
networked device. The syntax is just like the PING application in Windows or Linux.
Example:
>ping 192.168.29.209
192.168.29.209 is alive.
PROGRAM INFO
Displays a list of program files and modules residing on the Master.
Example:
>PROGRAM INFO
-- Program Name Info
-- Module Count = 1
1 Name is i!-PCLinkPowerPointTest
-- File Names = 2
1 = C:\Program Files\AMX Applications\i!-PCLinkPowerPoint
2 = C:\Program Files\Common Files\AMXShare\AXIs\NetLinx.axi
2 = Name is MDLPP
-- File Names = 2
1 C:\AppDev\i!-PCLink-PowerPoint\i!-PCLinkPowerPointMod.axs
2 C:\Program files\Common Files\AMXShare\AXIs\NetLinx.axi
PULSE [D:P:S or NAME,CHAN]
Pulses a specified channel on a device on and off. The device can be on any system the Master you
are connected to can reach. You can specify the device number, port, and system; or the name of
the device that is defined in the
DEFINE_DEVICE
section of the program.
Example:
>PULSE[50001:8:50,1]
Sending Pulse[50001:8:50,1]
PWD
Displays the name of the current directory.
Example:
pwd
The current directory is doc:
REBOOT <D:P:S>
Reboots the Master or specified device.
Example:
>REBOOT [0:1:0]
Rebooting...
RENEW DHCP
Renews/Releases the current DHCP lease for the Master.
Note: The Master must be rebooted to acquire a new DHCP lease.
Example:
>RENEW DHCP
RESETADMINPASSWORD
This command resets the administrator password back to "password".
Note: This command is only available to Program Port terminal sessions. It is not available to Telnet
sessions (see the Overview
).
RESET FACTORY
Resets the Master to factory default state including removal of all security settings, removal of all
user files, resetting to DHCP, and loading an empty NetLinx program. The Master will be effectively
in an out-of-box state.