![background image](http://html.mh-extra.com/html/amx/dvx-21xxhd/dvx-21xxhd_webconsole-and-programming-manual_2937827046.webp)
WebConsole - System Options
46
NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide
2.
Select either the
Control
or
Emulate
option.
3.
In the
Channel Code
section, enter a valid Channel number to emulate Channel messages (i.e., Push/Release, CHON, and
CHOFF) for the specified <D:P:S>.
The Channel number range is
1 - 65535
.
Select the
On
or
Off
buttons to Emulate Channel ON (CHON) and Channel OFF (CHOFF) messages for the specified <D:P:S>.
4.
Select the
Push
button to Emulate a push/release on the specified channel (not displayed if the
Control
option is selected).
Click and hold the
Push
button to observe how the device/Master responds to the push message.
5.
In the
Level Code
section, enter a valid Level number and Level data value for the specified <D:P:S> and press the
Send
button
to transmit the level data.
The
Level number
range is
1 - 65535
.
The table below lists the valid Level data types and their ranges:
6.
In the
Command
and
String
fields, enter any character strings that can be sent as either a String or Command, and press
Send
to transmit to the Master.
FIG. 49
Select Control/Emulate from within a selected Device’s Network Settings page
Level Data Type
Minimum Value
Maximum Value
CHAR
0
255
INTEGER
0
65535
SINTEGER
-32768
32767
LONG
0
429497295
SLONG
-2147483648
2147483647
FLOAT
-3.40238 3.40238
Click on Control/Emulate from within
the device’s Network Settings page
to Control/Emulate that device