![background image](http://html.mh-extra.com/html/amx/dvx-21xxhd/dvx-21xxhd_webconsole-and-programming-manual_2937827036.webp)
WebConsole - Security Options
36
NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide
Access Options
Check the
Enabled
option on the left side of this page to make the
Access
options available for selection. The Access options are
described in the following table:
(System Security) Access Options
Option
Description
Enabled:
This option enables the Access options described below.
Note: If the Master Security check box is not enabled, all subordinate options are grayed-out and not selectable,
meaning that the Master is completely unsecured and can be altered by any user (regardless of their rights).
Terminal (RS232)
Access:
If selected, a valid username and password is required for Terminal communication via the Master’s RS232
Program port.
HTTP Access:
If selected, a valid username and password is required for communication over HTTP or HTTPS Ports, including
accessing the WebConsole.
Telnet/SSH/SFTP
Access:
If selected, a valid username and password is required for Telnet Access. Telnet access allows communication over
either the Telnet and/or SSH Ports, and Secure FTP access.
Note: SSH version 2 (only) is supported.
To establish a secure Telnet connection, an administrator can decide to disable the Telnet Port and then enable the
SSH Port. Refer to the
section on page 51 for details.
Configuration:
If selected, a valid username and password is required before allowing a group/user to alter the current Master’s
security and communication settings via NetLinx Studio.
This includes such things as: IP configuration/Reset, URL list settings, Master communication settings, and
security parameters.
ICSP Connectivity: If selected, a valid username and password is required to communicate with the NetLinx Master via an ICSP
connection (TCP/IP, UDP/IP, and RS-232).
• This feature allows communication amongst various AMX hardware and software components. This feature
works in tandem with the
Require Encryption
option (see below) to require that any application or hardware
communicating with the Master must provide a valid username and password.
• In a Master-to-Master system, the Master which accepts the IP connection initiates the authentication process.
This configuration provides compatibility with existing implementations and provides more flexibility for the
implementation of other devices.
Note: The ICSP Connectivity option is required to allow authenticated and/or secure communication between the
Master and other AMX hardware/software. To establish an authenticated ICSP connection (where the external AMX
hardware/software has to provide a valid username and password), this option must be enabled.
Encrypt ICSP
Connection:
If selected, this option requires that any data being transmitted or received via an ICSP connection (among the
various AMX products) be encrypted, and that any application or hardware communicating with the Master over
ICSP must provide a valid username and password.
Note: When enabled, this option requires more processor cycles to maintain.
ICSP uses a proprietary encryption based on RC4 and also requires CHAP-type authentication including username
and password.
CHAP (Challenge Handshake Authentication Protocol) authentication is an access control protocol for dialing into
a network that provides a moderate degree of security.
• When the client logs onto the network, the network access server (NAS) sends the client a random value (the
challenge).
• The client encrypts the random value with its password, which acts as an encryption key. It then sends the
encrypted value to the NAS, which forwards it along with the challenge and username to the authentication
server.
Encrypt ICSP
Connection:
The CHAP server encrypts the challenge with the password stored in its database for the user and matches its
results with the response from the client. If they match, it indicates the client has the correct password, but the
password itself never left the client's machine.