manualshive.com logo in svg

AMX DVX-21XXHD, Webconsole & Programming Manual, Page: 49 / 116

Share
Download
AMX DVX-21XXHD Webconsole & Programming Manual Download Page 49

WebConsole - System Options

49

NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide

Once you have selected the diagnostics messages to enable, click 

Update

 to apply your changes, close the Edit Options 

window, and return to the Diagnostics page. 
Refer to the 

Diagnostics Options Definitions

section on page 50 for definitions of each Diagnostic option.

3.

The device that you just enabled diagnostics for appears in the Diagnostics Options page (identified by its Number, Device and 

Port assignments at the top of the Diagnostics Option list), with the currently enabled diagnostics indicated with a green 

checkmark (FIG. 53). 

All returned messages are displayed in the Incoming Messages window. By default, all messages are refreshed every 5 

seconds, as indicated by the 

Refresh Interval

 field. Use the Refresh Interval drop-down to specify how often your messages 

are updated (available values = 2 seconds, 5 seconds, or 10 seconds).
The default setting is 5 seconds.

4.

To add more devices to the Diagnostics Options page:



Repeat steps 1-3.



Alternatively, you can click one of the 

Edit

 buttons to open the Edit Options window, and specify a System 

Number

, 

Device

 

and 

Port

 for a known System Device. Select the Diagnostics messages that you want to enable for this device and click 

Update

.

FIG. 52  

Edit Options window

FIG. 53  

Edit Options window

Click to delete this device from the Diagnostics page

(disables all diagnostics on this device)

Click to apply changes

Click to close the Edit Options window 

(without disabling diagnostics)
Click to select from Presets

(saved sets of enabled Diagnostic messages)

Click to Store and Recall Presets

To set Diagnostic Options for a different System

Device, enter the device’s System, Device and Port

information in these fields (and press Update to 

add the specified device/diagnostics options

to the Diagnostics page).

Click the checkboxes to enable/disable

specific diagnostic messages

Scroll down to see the entire list.
(All Notifications enables all messages)

Click to select a different Refresh Rate

(default = 5 seconds)

Each device is identified here by it’s System

Number, Device and Port assignments

Click to modify the diagnostics settings

for this device, or to remove this device

from the Diagnostics Options list

Summary of Contents for DVX-21XXHD





















































































































Reviews:

No comments