Using the DXP-PRO Wizard
75
DXP-PRO v1.1 - Programmer’s Guide
To use FTP to transfer these files to the system's NetLinx Master, you'll need to know the Master's
IP Address:
1.
Launch Windows Explorer and navigate to the directory where your Design XPress project is
located.
2.
Locate and select every TXT file in the project folder. Be sure to select every TXT file, and
only
TXT files.
3.
Copy the files to clipboard memory (right-click on the selection and select
Copy
).
4.
Launch Internet Explorer.
5.
In the Address box, enter FTP://, followed by the IP Address of the Master, and press Enter.
6.
Assuming the IP Address was entered correctly, and the Master is connected properly, you are
presented with a dialog prompting you to enter the
User Name
and
Password
for the Master.
The default User Name is
NetLinx
.
The default Password is
password
.
7.
Enter the
User Name
and
Password
, and click the
Log On
button. Once you are logged on to
the Master, you should see directories associated with your Design XPress project.
8.
Paste the copied TXT files into the root of this directory. Do not paste them into a folder or
create a new folder for them; they must reside at the root.
9.
Reboot
the Master.
