AMX AXU-CA10 Instruction Manual Download

Page: 18 / 152

Introduction

DXP-PRO v1.1 - Programmer’s Guide

Lighting

MAX - Integrated Content Servers by AMX

MAX-MMS and MAX-IMS media servers are supported for G4 touch panels only, via Ethernet

control.

DXP-PRO treats these devices essentially the same as any other Ethernet-controlled device (such as

MP3 players). To add MAX servers to a DXP-PRO project be aware that:

The MAX-MMS and MAX-IMS servers are controlled only by Ethernet and must be

used with AMX G4 touch panels.

The MAX-AVM A/V Module(s) connected to a MAX-MMS server must each be set to a

unique zone number (per server).

Refer to the MAX-MMS and MAX-IMS Installation Guides (available online at

www.amx.com

) for details.

• Integra

RDV1

• Kenwood

DV5900M

• Marantz

DV8400

• Marantz

PMD930

• Marantz

VC5400

• Onkyo

DVS939

• Philips

Pro DVD 175

• Sony

DVP-CX777ES

• Yamaha

DVD-C940

• Yamaha

DVD-S2300MK2

• AMX ALD-D48

• AMX Radia

• Clipsal C-Bus

Note

: The Clipsal C-Bus and Dynalite lighting systems

(DXP-PRO v1.1 or higher) are primarily used outside the U.S.

• DynaLite - Any DTK Series

• Lehigh DX2

• LiteTouch 5000LC

• Lutron GRAFIK Eye

• Lutron Homeworks Interactive

• Lutron RadioRA

• Vantage Qlink

• Tridonic DALI

Note:

The Tridonic Lighting System type does not have

feedback; therefore, the buttons in DXP will not depress to
reflect feedback.

• Other Ethernet - user supplied/modified light

• Other Serial - user supplied/modified lights.axi

• MAX-MMS MultiMedia Servers (MAX-MMS125/200/300/350/400M/900M)

• MAX-IMS Integrated Music Servers (MAX-IMS500/1000/1500/2500)

Summary of Contents for AXU-CA10

























































































































































Search results

Summary of Contents for AXU-CA10

Reviews:

Related manuals for AXU-CA10

Brands by name

Popular brands

AMX AXU-CA10, Instruction Manual

Search results

Summary of Contents for AXU-CA10

Reviews:

Related manuals for AXU-CA10

Brands by name

Popular brands