Using the DXP-PRO Wizard
68
DXP-PRO v1.1 - Programmer’s Guide
Exporting a DXP-PRO Project
There are two ways to export an existing Design XPress - Professional project file. Both methods
have the same result; they each invoke the
Export
dialog, where you can specify a name and the
target directory for the exported Project (.PRO) file.
Select
File > Export
.
Select
Export
from the Project Selection List context menu.
Deleting a DXP-PRO Project
There are three ways to delete an existing Design XPress - Professional (DXP-PRO) project file.
All three methods have the same result; they each delete the Project selected (highlighted) in the
Project Selection list (on the Main Screen) from the hard drive.
First select a Project from the Project Selection List, then:
Click the
Delete Project
button on the Main Screen.
Select
File > Delete
.
Select
Delete
from the Project Selection List context menu.
The program will ask you to confirm this action in the
Confirm Delete Request
dialog (click
Yes
to
delete).
Before you’re Finished
It is recommended that before your finish your project you follow these steps to properly utilize the
DXP-PRO project files:
Finish your DXP-PRO project. After finishing the project, you are given the option to
view the Report file and open the output within NetLinx Studio.
Build your Active System, save the workspace, and then save the compiled
Main.AXS
file.
Upload your touch panel files to their target panels via TPDesign4.
Transfer the remaining project files to the target NetLinx Master via NetLinx Studio
version 2.2 (or greater).
FTP transfer the CD/DVD Title Information to the target NetLinx Master.
The following sections are laid out in their recommended order of completion.
The DXP-PRO Project must be have first been exported before it can be imported
(refer to the previous Importing a DXP-PRO Project section).
If a project is not exported before deleting, you will not be able to bring the project
back into DXP-PRO for modifications at a later date.
