Using the DXP-PRO Wizard
39
DXP-PRO v1.1 - Programmer’s Guide
Device Configuration dialog - Power Control tab
The options in the Power Control tab (FIG. 7) allow you to configure power control to the AV
equipment. This tab requires that you know how your equipment operates.
Device Supports Discrete On/Off
- If you have mapped Discrete On/Off functions for
this device, you can select to enable support of Discrete On/Off.
Govern Power
- This option enables governing power to the device, which means that
the System constantly monitors power to the device (for use with power sensors) rather
than simply toggling power On/Off.
Device/Power Feedback
- This option enables the display of power status of the device
on the touch panel. If this option is enabled, use the radio buttons to specify a
Power
Sensing Method
, based on the type of power sensor being used with the device (PSS2,
VSS2 or TVS).
Power Sensing Method
- Activated by enabling the Govern Power option (above). Use
the radio button to select the method of power sensing being used. This available power
sensors include: PCS2 (Dual Power Current Sensor), VSS2 (Video Sync Sensor), and
TVS (TV Sensor).
IR Timing Parameters (1/10 Second)
- Use the up/down arrows to adjust the time gap
between Power On and Power Off IR pulses, in 1/10-second increments (default = 50).
FIG. 7
Device Configuration dialog - Power Control tab
