Using the DXP-PRO Wizard
71
DXP-PRO v1.1 - Programmer’s Guide
Uploading a completed touch panel file to a target panel
1.
Double-click on the desired touch panel file (listed in the
User Interfac
e folder of the
Workspace
tab (
D
in FIG. 25). This action launches the TPDesign4 application and opens the
selected TPD4 file (
E
in FIG. 25).
2.
Preconfigure the touch panel for communication by accessing the System Connection page and
entering the communication parameters for the target NetLinx Master used for communication
to the panel. Refer to the particular touch panel instruction manual for more detailed
configuration setup procedures.
• Wiring/Connections:
This section details the locations where all of the cables will
connect. It will define the connections for all of the AMX
equipment as well as all source and display equipment, IR ports,
and any other connection that must be made.
Examples:
• CD Changer is connected to NetLinx using IR port 2, IR
pulse time 3/10 second
• DVD is connected to switcher input 1
Go through this section of the report one item at a time and
perform each connection. Use this section as a list of
connections to make and check them off as you go.
• General Information
This section of the report details the user interface file names for
each touch panel, which files need to be transferred to the
Master, lighting scene addresses, file names of the generated
NetLinx software, etc.
An example is:
Lighting Scenes
• Lighting Address=1 Button=102 Scene=Room Off
• Lighting Address=1 Button=1 Scene=Scene 1
• Macros:
This section of the report details all Macros added in the system,
as well as a list of all steps contained in each Macro. Use this
section to ensure that all of the intended functionality for each
Macro has been added.
An example is:
Macro: MAX 1_1 Navigation and Routing
• Send Plasma command 'Power On'
• Execute delay of 1 second
• Send Plasma command 'BNC' of type Video Inputs
• Execute delay of 1 second
• MAX 1_1 Routes to Plsm BNC on Device Switcher
• Execute delay of 1 second
• Execute lighting scene 'Scene 5'
• Execute 'Close' using relay device Window, state = PUSH
• Execute delay of 2 seconds
• Execute 'Close' using relay device Window, state = RELEASE
• AMX Recommended
Equipment List:
This section of the report lists all of the AMX equipment that will
be needed to build, install, and run the system. Both model
numbers and descriptions are given to make ordering the
equipment a simple process.
An example is:
• NXT-CV17 - 17" Modero Widescreen [1]
Note: use NXD-CV17 for wall mount
• MAX-MMS - MAX MultiMedia Server [1]
