2.2 Installation
Epica Distribution Matrix enclosures can be mounted in a standard EIA 19 in.
(48.26 cm) rack. Placing an Epica enclosure in a rack requires more than one
person.
Important
: The system requires at least one empty rack unit (3 inches is
recommended) above and below the enclosure to allow adequate airflow.
Items needed for rack installation:
q
Enclosure(s)
q
Standard EIA 19 in. (48.26 cm) rack
q
Pallet jack or forklift
q
Screwdriver
q
Screws that fit your rack for mounting the enclosure(s)
q
Power cords
q
Surge-protectors – highly recommended
q
Link cables and equipment (included with multi-enclosure systems)
Optional:
q
A laptop computer or PC with an RS-232 null modem cable or an
RS-422 cable (for communication with the Epica via the serial port)
Installation Procedure
The following is a list of installation recommendations:
ä
Write the serial number (normally located on rear of enclosure) in an easily
accessible location before installing the Epica
DG
in a rack.
ä
Use an earth-grounded power cord/system with the Epica.
ä
Attach all power cords to a single surge protector and/or an AC line
conditioner.
ä
Apply power to the Epica enclosure(s) before applying power to its source
and destination devices (see the power-up sequence on page 6-1).
2-4
Epica-128 & Epica-256 Installation & Setup
Placing the Enclosure
Placing
E
nclosures
