Ammann APH 110-95, Operating Instructions Manual

Page: 72 / 166

7.1 Ma chine main te nance
7.1.1 Clean ing
• Clean the ma chine on a daily ba sis.
• Af ter clean ing all ca bles, hoses, con nec tions and con nec tors
are to be checked for leak age, holed con nec tions, chaf ing
points and other dam age.
• De tected faults are to be elim i nated im me di ately.
7.1.2 Tight en ing torques
Strength classes for screws with un treated, non-lu bri cated sur -
face.
The val ues re sult in 90% uti li sa tion of the ap par ent yield ing point
at a fric tion co ef fi cient µ
tot
= 0.14.
Tight en ing torques are checked for cor rect ness us ing torque
wrenches.
When us ing lu bri cant MoS2, the spec i fied val ues do not ap ply.
7. Ma chine main te nance
69
Attention
For clean ing, do not use any flam ma ble or ag gres -
sive ma te ri als.
When clean ing the ma chine with a pres sure
washer, do not spray the elec tri cal com po nents di -
rectly.
When clean ing the ma chine with a pres sure
washer, do not hold it di rectly over the air fil ter. Important
Re new self-lock ing nuts af ter each re moval.