1-4
S100
Revised 10/2005
e-mail: [email protected] ; [email protected]; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
A - INTRODUCTION
4 . I N S T R U C T I O N S F O R T H E S E C U R I T Y O F T H E O P E R AT O R A N D
M A I N T E N A N C E
When the machine is set to the working area, it is recommended to keep the minimal distance said in the
drawing.
D A N G E R !
-
Before machine connection to the power make sure, whether all safety covers are mounted.
-
If it is necessary to remove some safety covers, switch off the operating switch (circuit breaker) and
disconnect the machine by the fork of supply from the socket.
-
Do not connect the machine to the power if some cover is removed.
WA R N I N G !
-
Remember the position of the operating switch (circuit breaker) so that is possible use it from the
arbitrary position.
-
Make sure, whether supply of energy and its dimensioning and safeguarding allows permanent
supply of energy needed for dependable output of the machine.
-
Do not forget to persuade yourself before fork connection to the socket whether both switches on
the machine are switched off.
-
Check if the electrical cables are not damaged, so that be touch with uncovered conductor, can not
occur any injury.
-
Check regularly if the safety covers are correctly mounted and whether they are not damaged.
-
When the covers are demaged, repair or replace them immediately for the new ones.
-
Do not switch the machine on without covers.
-
Do not touch rotary shafts by hands.
-
In any circumstance, do not put hands to the needle space.