S100
1-19
Revised 10/2005
e-mail: [email protected] ; [email protected] ; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
D - MACHINE ADJUSTMENT
1 . S T I T C H E S D E N S I T Y A D J U S T M E N T - S T R A I G H T S E C T I O N
a ) m a c h i n e m o d i f i c a t i o n S 1 0 0 - 0 3 0 / 0 3 3 / 0 3 5 / 0 3 6 / 0 5 2 / 0 5 3
1.
Remove auxiliary rear cover.
2.
Loosen the stud nut .
3.
Shift the rod stud in direction
1
to increase the stitch density, in direction
2
to decrease stitch
density.
4.
Tighten the nut .
N o t e :
The limiter is installed on the lever
. To obtain the stitch density 8-9 stitches/cm, shift the rod
stud towards the limiter. To decrease the density, remove the limiter .
b ) m a c h i n e m o d i f i c a t i o n S 1 0 0 - 0 6 0
1.
Fold the rear cover.
2.
Start to sew the buttonhole, and stop the
machine at the moment, when the lever is
shored up to screw .
3.
Loosen the nut and shift the lever in the
slot. To decrease the density move the lever up,
to increase the density move the lever down.
4.
Tighten the nut .
1
2
1
2