AMF REECE S100, Parts And Service Manual, Page: 67 / 93

1-62
S100
Revised 10/2005
e-mail: service@amfreece.cz ; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
F - MACHINE ADJUSTMENT - CROSS BAR
4 . D E V I C E F O R S E W I N G T H E C R O S S B A R
T h e m e c h a n i s m s f o r s e w i n g t h e c r o s s b a r a d j u s t m e n t
1. Remove the side cover and tilt the rear cover.
2. Loosen the nut and using the screw adjust the lever , to obtain the clearance 1.5 mm
between the lever and the cam .
3. Using the hand crank move the table to the rearward position from the operator. The lever in this
position, must be lifted, so that the pawl falls behind the top of the lever drive in direction to
the operator. The clearance 0.5 - 1 mm should be maintained between the pawl and the top of the
lever .
4. The lifting of the lever is ensured by jack . After loosening the nut , it is possible to change
the position of the jack by screw . When the lever pressed, keep the clearance 1 mm.