S100
1-7
Revised 10/2005
e-mail: [email protected] ; [email protected] ; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
A - INTRODUCTION
6 . P O S I T I O N O F T H E L A B E L S A N D T H E S A F E T Y D E V I C E S
WA R N I N G !
When the machine works, it is not disabled to give the fingers to the space between the
machine table and machine head in marked place. When the working board moves, the clearance in this
place is about 50 mm. If fingers are accidentally put into this place, it can occur very serious injury.
Front cover of the frame and lock screw of the folding rear cover, which disable tilting of the rear cover, are
dismantled during transport. It is necessary to install these safety parts to the machine before the machine is
switched on.
C A U T I O N !
If it is necessary to lift the head out of the home position, it is necessary to tilt the folding
front cover to the operator side, then put the head back. If this process is not kept, and the machine is
switched on, the cover will be damaged.
1
Locking
screw
4
3
Folding
rear cover
2
Bedplate
3
5
Frame
4
Front cover of the frame
12
Table
9
10
12
6
8
Machine head