S100
1-49
Revised 10/2005
e-mail: [email protected] ; [email protected] ; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
D - MACHINE ADJUSTMENT
2 1 . C U T T I N G L E V E R A N D A N V I L
1.
Side adjustment of the cutting lever do with inserted knife after loosing the cutting lever studs locknuts
and by moving the studs
to the left or right, as needed.
2.
Tighten the studs .
N o t e :
If the buttonhole cut looks like illustration
1
, rotate the studs to the right, if the buttonhole cut
looks like illustration
2
, rotate the studs
to the left.
3.
After anvil adjustment , insert the cutting knife.
4.
Loosen the knife holder set screws , and by holder
shifting to the left or right, obtain the proper
position of the lower knife.
5.
Check by manual pressing of the cutting lever, if both knives have the same position.
6.
After setting-up, do not forget to replace one of the knives by suitable cutting steel. Then tighten the
set screws .
2
1