Ametek Dycor Dymaxion Mass Spectrometer, User Manual

Page: 41 / 128

Figure 6
9. Tighten the 1/16” nut at the end of the heater assembly onto the 1/16”
customer process fitting (Figure 6).
10. Retighten the 1/8” Swagelok fitting located on the customer side of the
capillary heater assembly (Figure 6).
Figure 7
11. Make sure the spiral stretch-to-length heater covers all the tubing and
fittings, beginning at the ProLine valve stub (Figure 7a) and continu¬ing
to the customer process fitting (Figure 7b). The heater should
encapsulate the entire length of the capillary tube.
Figure 8