Ametek Drexelbrook Impulse GW Series, Installation And Operating Instructions Manual, Page: 36 / 99

Impulse™ Series
30
3.4 Configuration and Calibration With HRTWin™
This section instructs the user how to use the Drexelbrook 401-700-2X/6X
Series PC calibrator software to configure and calibrate the Impulse®
Transmitter. HRTWin ™ software is available for Impulse HART versions
only.
3.4.1 General Description
The 401-700-2X/6X software package allows the use of any Windows® 9X/
NT/2000/XP/7-based personal, laptop, or notebook computer to calibrate
the HART  Protocol transmitter.
The Impulse® transmitter is compatible with HRTWin™ 8.0 or greater.
It is recommended the latest version be used for best functionality.
The latest version is available as a free download at www.drexelbrook.com
3.4.2 Model Number
4 0 1 - 0 7 0 0 - 0 2 1
PC Software Package includes:
RS232 Modem Assembly 401-0700-004 (Figure 5-1 ) .
4 0 1 - 0 7 0 0 - 0 2 2
PC Software Package includes:
Contents in 401-0700-021, HRTWin™ version 2.1 or greater on a CD-ROM.
4 0 1 - 0 7 0 0 - 0 6 1
PC Software Package includes:
USB Modem Assembly 401-0700-007 (Figure 5-1a).
4 0 1 - 0 7 0 0 - 0 6 2
PC Software Package includes:
Contents in 401-0700-61, Utilities and Drivers on a CD-ROM, and
HRTWin™ version 2.3 or greater on a CD-ROM.
4 0 1 - 0 7 0 0 - 0 3 1
HRTWin™ on a CD-ROM.
3.4.3 System Requirements
PC Requirements
Windows® 95, 98, ME, 2000, XP. 7
The USB modem is not compatible with Windows® 95, 98 First Edition,
or NT. It is recommended that the software be installed on a hard drive
with 20 megabytes or more of space available.
Input to Modem
RS232 or USB Port, from one of the COM serial ports (COM1, COM2,
etc..). The PC provides operating power for the modem but not for the
transmitter.
Output
(to Transmitter being Calibrated)
4-20 mA in HART® Protocol.