Ametek Drexelbrook Impulse GW Series, Installation And Operating Instructions Manual

Page: 27 / 99

Configuration and Calibration
21
3.1 Display / Keypad Operation
Section 3
4-20 mA HART® Unit Configuration
To enter the Configuration Menu:
• Press and Hold the "Enter" Button for approximately 5 seconds.
• Use the "Up" and "Down" Buttons to scroll through the available menu
selections.
• Press "Enter" to access sub-menu items.
• Press "Enter" again to allow setting to be edited.
• Use the "Up" and "Down" Buttons to adjust settings.
Settings that can be adjusted will be "flashing".
• Press "Enter" to accept the adjustment...Or...
• Press and Hold the "Enter" Button for approximately 5 seconds to exit
to the previous menu level.
Section 3