Chapter 2 AMIBIOS Setup
61
Advanced CMOS Setup,
Continued
PS/2 Mouse Support
Set this option to
Enabled
to enable AMIBIOS support for a PS/2-type mouse. The
settings are
Enabled
or
Disabled.
The Optimal and Fail-Safe default settings are
Enabled.
BootUp Num-Lock
Set this option to
On
to turn the Num Lock key On at system boot. The settings are
On
or
Off.
The Optimal and Fail-Safe default settings are
On.
Wait for ‘F1’ If Error
Set this option to
Enabled
to have the system BIOS wait for any error. At this line,
you can press <F1> to enter Setup to attempt to fix the problem. If you disable this option,
AMIBIOS will not wait on an error. The settings are
Enabled
or
Disabled
. The Optimal
and Fail-Safe default settings are
Enabled
.
Hit ‘DEL’ Message Display
Normally, AMIBIOS displays
Hit Del to enter Setup
while the system is doing memory initialization. If this option is disabled, this message
does not display. The settings are
Enabled
or
Disabled
. The Optimal and Fail-Safe default
settings are
Enabled
.
Boot To OS/2
Set this option to
Yes
if running OS/2 operating system and using more than 64 MB of
system memory on the motherboard. The settings are
Yes
or
No
. The Optimal and Fail-Safe
default settings are
No.
Cont’d
Summary of Contents for MegaDual
