American Megatrends MegaDual, User Manual

Page: 71 / 120

Chapter 2 AMIBIOS Setup 65
Advanced CMOS Setup,
Continued
Floppy Drive A: and B : Move the cursor to these fields via
↑
and
↓
and select the floppy type. The settings
are Disabled, 360 KB 5¼ inch , 1.2 MB 5¼ inch , 720 KB 3½ inch , 1.44 MB 3½ inch or
2.88 MB 3½ inch.
The Optimal setting for floppy drive A: is 1.44 MB 3½. The Failsafe setting for floppy
drive A: is 1.44 MB 3½.
The Optimal setting for floppy drive B: is Disabled. The Failsafe setting for floppy drive B:
is Disabled .
Diskette Write Protect Set this option to write protect the floppy diskette. The settings are Enabled, or
Disabled. The Optimal and Failsafe settings are Disabled .
Floppy Drive Seek Set this option to Enabled for the motherboard to seek the floppy drive controller. The
settings are Enabled, or Disabled. The Optimal and Failsafe settings are Disabled .
Floppy Drive Swap If you have two floppy drives in a system, the BIOS assumes the drives are A: and B:,
based on the cable position of the drive. Set this option to Enabled to have the drives
logically swapped (A: becomes B:, and B: becomes A:.) The settings are Enabled, or
Disabled. The Optimal and Failsafe settings are Disabled .
Cont’d