American Megatrends MegaDual, User Manual

Page: 65 / 120

Chapter 2 AMIBIOS Setup 59
Advanced CMOS Setup,
Continued
STANDARD BOOT SETTINGS SCREEN
Standard Boot Settings You can use this screen to select options for the Standard Boot Settings. Use the
up and down arrow keys to select an item, and the plus (+) and minus (-) keys to change
the option setting. The settings are described on the following pages. The screen is
shown below.
BIOS SETUP UTILITY
Advanced
Standard Boot Settings
-----------------------------------------
----
Quick Boot Enabled
Pause-On Configuration Display 5 sec
Boot With Minimum Memory Disabled
Display BIOS POST Messages Yes
Display Add-On ROM Messages Yes
------------------------------------------
--
Typematic Rate
Fast
System Keyboard Absent
Primary Display VGA/EGA
PS/2 Mouse Support Enabled
Bootup Num-Lock On
Wait For ‘F1’ If Error
Enabled
Hit ‘DEL’ Message Display Enabled
Boot To OS/2 No
Allows BIOS to
skip certain
tests while
booting. This
will decrease the
time needed to
boot the system.
↔
Select Screen
↑↓
Select Item
+- Change Option
F1 General Help
F8 Load Failsafe
F9 Load Optimal
F10 Save and Exit
ESC Exit
©Copyright 1985-1999, American Megatrends, Inc.
Quick Boot Set this option to Enabled to instruct AMIBIOS to boot quickly when the computer is
powered on. The settings are Disabled or Enabled . The Optimal and Fail-Safe default
settings are Disabled .
Pause-On Configuration Display Set this option to pause after the system configuration box appears and
before control is given to an operating system. The settings are Disabled, 2 sec, 5 sec, or
10 sec. The Optimal and Fail-Safe default settings are 5 sec.
Cont’d