NIECO MODEL 9025 - BURGER KING CHAIN BROILER
TWO – SINGLE FLOW POINT NOZZLE (P/N 11982)
The Nieco Chain Broiler Model 9025 is a unique appliance and when fitted with two catalysts it requires the
use of two Amerex nozzles (P/N11982) to protect each half of the appliance. Total appliance protection
therefore, requires the use of a total of four Amerex nozzles (P/N 11982). This unique appliance is actually
two chain broilers put together to accommodate the cooking of two different products at the same time. This
appliance can be fitted with two catalysts (18” x 24” overall) one for each cooking side.
The protection of the appliance is accomplished by using two nozzles P/N 11982 positioned two inches
outside of the catalyst perimeter aimed at the center point of the catalyst. The nozzles are to be located on
opposite ends of the catalyst, 180° apart and are to be 13” to 36” above the top surface of the catalyst. This
configuration is repeated for both cooking sides of the appliance. If no catalyst is used the same protection is
required for the unit.
December 2008
Section 3 KP Design Page 3 – 20
Amerex Restaurant Fire Suppression System (EX 4658)
Note
: Maximum & minimum heights
must be measured from the tip of nozzle
to the top surface of the catalyst or
appliance (if no catalyst is used).
13"-36"NOZZLE
HEIGHT ABOVE
CATALYST
NOZZLE LOCATED 2" BEHIND
THE EDGE OF THE CATALYST
AIMED TO THE CENTER OF THE
CATALYST - 18" x 24"
TOP VIEW
FRONT VIEW
NEICO 9025
CHAIN BROILER
