August 2014
Section 2 System Components
Page 2 – 2
Amerex Restaurant Fire Suppression System EX 4658)
375 CYLINDER MOUNTING BRACKET (P/N 16085)
DISTRIBUTION HOSE (P/N 13069)
375 AGENT CYLINDER BRACKET (P/N 17690)
MODELS 275 / 375 & 475 CYLINDER
MOUNTING BRACKET(P/N 16920)
SWIVEL ADAPTER (P/N16901)
The Swivel Adapter connects the distribution piping–
½” NPT to the valve outlet.
AGENT CYLINDER ASSEMBLY
MODEL 600 (P/N 15196) CE MARK/EN3 MODEL 600 (P/N 16339)
Amerex MODEL 600 – 6.14 Gallon Capacity – Agent Cylinder
Assembly
is shipped factory filled with Amerex Kitchen Wet Chemical
Agent. It is pressurized with dry Nitrogen or argon gas to a pressure of
240 psi (1655 kPa) at 70°F (20°C). The nitrogen charge is the expellant
gas which discharges the KP agent through the distribution network.
Cylinders are shipped from the factory with a shipping plate installed on
the top of the valve to prevent accidental discharge and an anti-recoil
plate on the valve outlet to redirect chemical flow should an accidental
discharge occur.
BOTH OF THESE PLATES MUST BE REMOVED
AT INSTALLATION.
KP600 Agent cylinders are DOT 4BW240, tested to 480 psi (3309
kPa) and require a hydrostatic test every twelve (12) years. The
operating temperature of this and other listed components is 32°F to
120°F (0°C to 49°C). The machined, forged brass discharge valve is
actuated via a pneumatic actuator. The Mechanical Release Module
supplies the N2 required for actuation of one (1) to six (6) KP600
Agent Cylinder Assemblies
.
P/N 15196
U.S.
METRIC
Height
27.59 in
70.08 cm
Diameter
12 in
30.5 cm
Weight full
114 lb
51.70 kg
Capacity
6.14 gal
23.2 liter
The mounting bracket is used to secure the KP/ZD 375
Agent Cylinder Assembly to the mounting surface and to
connect the discharge valve to the distribution-piping
network. The bracket consists of a formed steel assembly
with vertical and horizontal supports and an integral pipe
thread adapter with ½” NPT threads. The pipe thread
adapter may be oriented to any convenient outlet position.
-
DISCONTINUED -
The distribution hose is used to connect the agent cylinder
assembly to the distributor block (P/N 13105). The supply
line is connected to the distributor block (included with
cylinder mounting bracket).
-
DISCONTINUED -
The 275 / 375 & 475 Mounting Bracket is used to secure the Models 275/ 375 &
475 Agent Cylinder Assembly to the mounting surface. The Cylinder Mounting
Bracket is made from 1/8” thick formed steel and painted red to resist corrosion.
The assembly comes with a stainless steel belly strap and a Swivel Adapter for
connection to the cylinder valve outlet.
The mounting bracket is used to secure the KP/ZD 375 Agent Cylinder
Assembly to the mounting surface. The bracket assembly comes with a
S.S. belly strap and a swivel adapter for connection of the valve outlet to
the piping network. The bracket is made from formed carbon steel metal
and dry painted red. –
DISCONTINUED
-
