AMCI ANS1 ANYNET-I/O, User Manual

Page: 86 / 90

Input Data Format
ADVANCED MICRO CONTROLS INC.
6
86
Data Attribute 18: Die Monitor Data
Figure 6.13 Die Monitor Data Format (Data Attribute 18)
EtherNet/IP
Address
Modbus
Address
Bit Number
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 0
Ackno
wled
ge
Heartbeat
Ha
rd
wa
re
Fa
ult
Resolver Fault
Program Fault
Bits
RPM Clamped
Output Forced
0 1 0 0 1 0
1 1
Machine Position
2 2
State of Fault Outputs
(Bit 0 = Output 1 ... Bit 15 = Output 16)
Bit equals ‘0’ if the output is not assigned as a D.P. Fault Output.

Bit equals ‘1’ if the output is a D.P. Fault Output and a fault has not

occurred.

Bit equals ‘0’ if the output is a D.P. Fault Output and a fault has
occurred.
3 3
State of Fault Inputs (Bit 0 = Input 1 ... Bit 15 = Input 16)
Bit equals ‘0’ if the input is not assigned as a D.P. Input.

Bit shows actual state of the input if it is assigned as a D.P. Input.
4 4
First Input to Fault
(Bit 0 = Input 1 ... Bit 15 = Input 16)
Bit equals ‘1’ if the associated input was the first to fault in the present

production cycle.
5 5
Faulted Die Protection Inputs (Bit 0 = Input 1 ... Bit 15 = Input 16)
Bit equals ‘1’ if the associated input has a fault on it in the present

production cycle.
6 6
Selected Input Point Number

(See Word 3, Command Block 1, page 54.)
7 7
Number of Faults on the Selected Input
Die Protection Fault Counter value for the selected input.
8 8
Rising Position of Selected Input

Last position where the input made an inactive-to-active transition.
9 9
Falling Position of Selected Input

Last position where the input made an active-to-inactive transition.
10-19 10-19 Not Used