AMCI ANS1 ANYNET-I/O, User Manual

Page: 80 / 90

Input Data Format
ADVANCED MICRO CONTROLS INC.
6
80
Data Attribute 4: Die Monitor Setup Data (continued)
Die Monitor Action Mode Values .
Data Attribute 5: Brake Monitor Setup Data
Figure 6.7 Brake Monitor Setup Data Format (Data Attribute 5)
Action Mode
(Word 12 Value)
Result
0
Die Protection Fault Counter will continuously count.

Disable associated output when fault counter is non-zero.
1
Die Protection Fault Counter will reset to zero when cycle completes

without a die protection fault.

Disable associated output when fault counter is non-zero.
2
Die Protection Fault Counter will continuously count.

Associated output is disconnected from the monitor and is always active.
3
Die Protection Fault Counter will reset to zero when cycle completes

without a die protection fault.

Associated output is disconnected from the monitor and is always active.
EtherNet/IP
Address
Modbus
Address
Bit Number
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 0
Ackn
owledg
e
He
artbe
at
Hardwa
re
Fa
ult
R
esolver Fault
Program Fault
Bits
RPM Clamped
Output Forc
ed
0 0 0 1 0 1
1 1
Brake Input Number
2 2 Complete Stop Count parameter
3 3 Start Time Limit parameter
4 4 Start Time Overrun Output (‘0’ if no output assigned to this function)
5 5 Stop Time Limit parameter
6 6 Stop Time Overrun Output (‘0’ if no output assigned to this function)
7-19 7-19 Not Used