Amazone UG 2200 Special, Operating Manual

Page: 65 / 252

Structure and function
5.4.1 Coupling hydraulic hose lines
WARNING
Risk of crushing, cutting, being trapped or drawn in, or impact
through faulty hydraulic functions when hydraulic hose lines are
incorrectly connected.
When coupling the hydraulic hose lines, please note the coloured
markings on the hydraulic plugs.
•
Check the compatibility of the hydraulic fluids before connecting
the machine to the tractor hydraulic system.
Do not mix any mineral oils with biological oils.
•
Observe the maximum permissible hydraulic fluid pressure of
210 bars.
•
Only couple clean hydraulic connectors.
•
Slide the hydraulic connector(s) into the hydraulic sockets until
they are heard to engage.
•
Check the coupling points on the hydraulic hose lines, to see if
they are sitting correctly and are sealed.
1. Swivel the actuation lever on the control valve on the tractor to
float position (neutral position).
2. Clean the hydraulic plugs on the hydraulic hose lines before
coupling the hydraulic hose lines with the tractor.
3. Connect the hydraulic hose line(s) to the tractor control unit(s).
5.4.2 Disconnecting hydraulic hose lines
1. Swivel the actuation lever on the control unit on the tractor to
float position (neutral position).
2. Unlock the hydraulic connectors from the hydraulic sockets.
3. Protect the hydraulic plug and hydraulic socket against soiling
using the dust protection caps.
4. Store the hydraulic hose lines in the hose cabinet.
BAG0021.14 05.19 65