Amazone UG 2200 Special, Operating Manual

Page: 34 / 252

General safety instructions
Pneumatic braking system
•
Before coupling the machine, clean the sealing rings on the hose
couplings of the supply and brake line.
•
Only move off with the machine connected when the pressure
gauge on the tractor shows 5.0 bar.
•
Drain the air reservoir every day.
•
Before driving without the machine, lock the hose couplings on
the tractor.
•
Hang the hose couplings of the machine supply and brake lines
in the appropriate empty couplings.
•
When filling up or replacing the brake fluid, use the prescribed
fluid. When replacing the brake fluid, comply with the appropriate
regulations.
•
Do not make any changes to the specified settings on the brake
valves.
•
Replace the air reservoir if:
ο
the air reservoir can be moved in the tensioning belts
ο
the air reservoir is damaged
ο
the rating plate on the air reservoir is rusty, loose or miss-
ing.
Hydraulic brake system for export machines
•
Hydraulic brake systems are prohibited in Germany.
•
When filling up or replacing the brake fluid, use the prescribed
hydraulic fluids. When replacing the hydraulic fluids, comply with
the appropriate regulations.
2.16.7 Tyres
•
Repair work on tyres and wheels may only be carried out by
specialists with suitable installation tools.
•
Check the air pressure at regular intervals.
•
Inflate tyres to the specified pressure. If the air pressure in the
tyres is too high, then there is a risk of explosions.
•
Park the machine in a safe place and lock the machine against
unintentional lowering and rolling (parking brake, wheel chocks),
before carrying out work on the tyres.
•
Tighten or retighten all the fixing screws and nuts in accordance
with the specifications of AMAZONEN-WERKE.
34 BAG0021.14 05.19