Amazone EDX 9000-TC, Operating Manual

Page: 89 / 246

Structure and function
EDX 9000-TC BAH0048-6 09.2019 89
5.7.4 Calibration test
The calibration test checks whether the set and actual fertiliser
quantities are equal.
Always carry out a calibration test

when changing the type of fertiliser.

if the same type of fertiliser is used, but with a different grain
size, grain shape and specific weight.

if there are any deviations between the determined and actual
fertiliser quantity.
The fertiliser quantity produced during the
calibration test drops into the calibration trough
(Fig. 104/2).
The number of calibration troughs corresponds
to the number of metering units.
The calibration troughs secured to the hopper
rear wall using a linch pin (Fig. 104/1) for
transport.
Fig. 104
The calibration crank (Fig. 105/1) is in parking
position in the transport bracket.
Fig. 105