Amazone EDX 9000-TC, Operating Manual

Page: 147 / 246

Settings
EDX 9000-TC BAH0048-6 09.2019 147
5. If required, create a job on the AMATRON
3.
6. Undo the locking knob (Fig. 196/1).
7. Set the indicator (Fig. 196/2) of the gearbox
lever from below to the gearbox setting
value "50".
8. Tighten the locking knob.
9. Fit the calibration crank handle on the star
wheel (Fig. 193/2).
10. Turn the star wheel with the calibration
crank counterclockwise until the screw
flights of the metering roller in each
metering unit are filled with fertiliser.
11. Close all of the injector sluice flaps (Fig.
195/1).
12. Empty the calibration troughs under each
metering unit and then put them back
underneath again.
13. Open all of the injector sluice flaps (Fig.
195/2).
14. Turn the star wheel anticlockwise the
number of crank turns specified in the table
(Fig. 197).
Fig. 196
Nu
mber o
f s
eeding
units
Row sp
acin
g
[c
m
]
Working
width [m]
Cran
k turn
s on 1/40
[ha
]
Cran
k turn
s on 1/10
[ha
]
12 70 8.4 13.9 55.2
12 75 9.0 13.0 51.5
12 80 9.6 12.2 48.3
16 55 8.8 13.3 52.7
16 60 9.6 12.2 48.3
18 50 9.0 13.0 51.5
20 45 9.0 13.0 51.5
Fig. 197