Amazone EDX 9000-TC, Operating Manual

Page: 117 / 246

Coupling and uncoupling the implement
EDX 9000-TC BAH0048-6 09.2019 117
7. Fill the hydro reservoir (Fig. 140/1) before
moving off.
7.1 Press the brake pedal of the tractor for
at least 10 seconds.
This fills the hydraulic accumulator.
Fig. 140
To ensure the full effectiveness of the
service brake system, fill the hydraulic
accumulator before moving off.
8. Apply the tractor parking brake, switch off
the tractor engine, and remove the ignition
key.
9. Remove wheel chocks.
10. Release the implement parking brake.
DANGER
Risk of accidents due to disfunctional brakes!
After pulling out the spring cotter pin (e.g. when triggering the
emergency brake), be sure to reinsert the spring cotter pin into the
brake valve from the same side (Fig. 139). Otherwise, the brakes are
without function.
After the spring cotter pin has been reinserted, it is necessary to
perform a brake test for the service brake and for the emergency
brake.
When the implement is uncoupled, the pressure accumulator presses
hydraulic oil:

into the brake and brakes the implement,
or

into the hose line to the tractor and impedes the coupling of the
brake line to the tractor.
In these cases, relieve pressure using the hand pump on the brake
valve.