Amazone EDX 9000-TC, Operating Manual

Page: 125 / 246

Coupling and uncoupling the implement
EDX 9000-TC BAH0048-6 09.2019 125
7.5 Uncoupling the implement
WARNING
Danger of being crushed, cut, caught, drawn in or struck
through insufficient stability and possible tilting of the
uncoupled implement!
Set the empty implement down on a horizontal parking area with a
firm base.
Fully fold in or out the sections of the implement before decoupling
the implement from the tractor. The implement is tail-heavy with the
coulter frame half raised. Once the tractor's lower link has been
detached, the implement tilts over the axle onto the coulters and the
tensioned crosspiece whips upwards.
When uncoupling the implement, there must always be enough free
space in front of the implement that the tractor can be aligned with the
implement again during recoupling.
DANGER
The implement is tail-heavy with the coulter frame raised.
If, in exceptional circumstances, you need to uncouple the implement
with the coulter frame raised, equip the implement with additional
weights (available as accessories) before uncoupling it.
1. Switch off the tractor PTO shaft.
2. Align the tractor and implement so that they
are straight on a horizontal parking surface
with a firm substrate.
3. Fold the implement completely in or out.
4. Switch off the AMATRON 3.
4.1 Press the (Fig. 150/1) button.
5. Apply the tractor parking brake, switch the
tractor engine off and remove the ignition
spanner.
Fig. 150