Amazone EDX 9000-TC, Operating Manual

Page: 178 / 246

Use of the implement
178 EDX 9000-TC BAH0048-6 09.2019
10.4.2 Filling the fertiliser hopper
DANGER
Switch off the tractor PTO shaft, apply the tractor parking brake,
switch off the tractor engine and remove the ignition key.
1. Proceed as follows:

Couple the implement to the tractor
(see section "Coupling and uncoupling
the implement", Seite 108)

Unfold
(see section "Unfolding the implement
sections", Seite 171)

Place the implement on the coulters.
2. Switch off the fan.
3. Disengage the tractor PTO shaft, engage
the tractor parking brake, shut off the tractor
engine and remove the ignition key.
Fig. 241
4. Release the rubber loops (Fig. 241/1)
together with the cover hook (Fig. 241/2).
5. Lift the ladder (Fig. 242/1) out of the locking
device (Fig. 242/2) and lower to the stop
(Fig. 242/3).
Fig. 242
CAUTION
Danger of getting crushed. Hold
the ladder only at the marked
positions.
6. Climb on the loading board via the ladder.
7. Release the rubber loops on the end face.
8. Open the swivelling cover tarpaulin.
9. Remove any other parts in the hopper.
10. Adjust the fill level sensor(s) in the hopper
(see section "Setting the fill level sensor",
Seite 143).
Fig. 243