Amazone EDX 9000-TC, Operating Manual

Page: 222 / 246

Cleaning, maintenance and repairs
222 EDX 9000-TC BAH0048-6 09.2019
12.5.10 Visual inspection of the lower link pins
WARNING
Risk of contusions, catching, and knocks when the implement
unexpectedly releases from the tractor!
Check the lower link pin for conspicuous defects whenever the
implement is coupled. Replace the drawbar, if there are any clear
signs of wear to the lower link pins.
12.5.11 Servicing the sowing shaft bearing
Lightly grease the seat of the sowing shaft
bearing with a thin mineral oil (SAE 30 or SAE
40).
Fig. 322
12.5.12 Checking inflation pressure of the tyres

The required tyre pressure is dependent on

the tyre size

the tyre load-bearing capacity

the forward speed

The operational performance of the tyres is reduced

by overloading

if the tyre pressure is too low

if tyre pressure is too high

Check tyre pressures regularly when the tyres are cold, i.e.
before starting a run (see page ).

The difference in pressure between the tyres on one axle must
be no greater than 0.1 bar.

The tyre pressure can be raised by up to 1 bar after a fast run or
in warm weather. Tyre pressure should never be reduced in this
case, as it is then too low when the tyres cool down.