Amazone EDX 9000-TC, Operating Manual

Page: 37 / 246

General Safety Instructions
EDX 9000-TC BAH0048-6 09.2019 37
Hydraulic brake system for export implements

Hydraulic brake systems are not approved in Germany.

When filling up or replacing the brake fluid, use the prescribed
hydraulic fluids. When replacing the hydraulic fluids, comply with
the appropriate regulations.
2.16.6 Tyre

Repair work on tyres and wheels may only be carried out by
specialists with suitable installation tools.

Check the air pressure at regular intervals.

Inflate tyres to the specified air pressure! If the air pressure in
the tyres is too high, then there is a risk of explosions.

Park the implement in a safe place and lock the implement
against unintentional falling and rolling (parking brake, wheel
chocks), before carrying out work on the tyres.

Tighten or retighten all the fixing screws and nuts in accordance
with the specifications of AMAZONEN-WERKE.
2.16.7 PTO shaft operation

You can attach or detach items to/from the PTO shaft only after
you have done all of the following:

the PTO shaft is switched off

the tractor engine is switched off.

the parking brake has been applied.

the ignition spanner has been removed.

Before switching on the PTO shaft, check that the selected PTO
shaft speed of the tractor matches the permitted drive speed of
the implement.

Instruct everyone to leave the danger area of the implement
before switching on the PTO shaft.

Never switch on the PTO shaft while the tractor engine is turned
off.

After the PTO shaft is switched off, there is a risk of injury from
the continued rotation of freewheeling implement parts.
Do not approach too near to the implement during this time. You
must only start work on the implement once all implement parts
are at a complete standstill.