Coupling and uncoupling the implement
84
ED 02 BAH0023.0 03.14
7.2.1
One control unit for two implement functions (control unit, optional)
If there are fewer tractor control units available
than are needed, two implement functions can
be assigned to one tractor control unit.
Select one of the two functions desired using the
lever (Fig. 68/A) and then confirm with the
tractor control unit.
Check the function with lever setting "A" and "B"
before bringing into use.
Fig. 68
DANGER
Risk of mixing up the functions! Before operating the tractor
control unit, check the lever setting of the control unit (Fig. 68).
7.2.2
Hydraulic connection Profi control
Profi control without load-sensing function
Interfac
e
Implement side
Identification of the
hydraulic lines
Tractor control unit
implement functions
Tractor
Red
1
Flow pipe:
pressure line
with priority*
single
acting
No.
1
Profi control without load-
sensing function
2
Return flow
pressure-free
tank line*
* Follow installation instructions [see section "Installation regulations Profi control", field].
Interfa
ce
Implement side
Identification of the
hydraulic lines
Tractor control unit
implement functions
Tractor
Red
1
Flow pipe:
pressure line
with priority*
single
acting
No.
2
Blower fan hydraulic motor
(R)
2
Return flow
pressure-free
tank line*
** Observe the installation instructions [see section "Installation regulations Profi control", Seite 73].
