Settings
126
ED 02 BAH0023.0 03.14
10. Loosen the turnbuckle lock nut (Fig. 130/1).
11. Adjust the turnbuckle so that the track
marker disc (Fig. 129/2) touches the
ground.
12. Shorten the turnbuckle by one turn so that
the working depth of the track marker disc
is limited to approximately 5 cm.
13. Tighten up the turnbuckle lock nut (Fig.
130/1).
Fig. 130
8.13
Adjusting the wheel mark eradicator
First bring the wheel mark eradicator in the field to the working
position and, after work has finished, fasten it right at the top to avoid
damage when setting the implement down.
DANGER
Disengage the tractor universal joint shaft, engage the tractor
parking brake, shut off the tractor engine and remove the
ignition key.
Before moving the wheel mark eradicator
•
Horizontally: loosen nut (Fig. 131/1)
•
Vertically: loosen the bolt (Fig. 131/2).
Fig. 131
