General Safety Instructions
16
ED 02 BAH0023.0 03.14
2.10
Design changes
You may make no changes, expansions or modifications to the
implement without the authorisation of AMAZONEN-WERKE. This
also applies when welding support parts.
Any expansion or modification work shall require the written approval
of AMAZONEN-WERKE. Only use modification and accessory parts
approved by AMAZONEN-WERKE so that the type approval, for
example, remains valid in accordance with national and international
regulations.
Vehicles with an official type approval or with equipment connected to
a vehicle with a valid type approval or approval for road transport
according to the German road traffic regulations must be in the state
specified by the approval.
WARNING
Risk of crushing, cutting, being trapped or drawn in, or impact
through the failure of support parts.
It is strictly forbidden to
•
drill holes in the frame or on the running gear.
•
increase the size of existing holes on the frame or the running
gear.
•
weld support parts.
2.10.1
Spare and wear parts and aids
Immediately replace any implement parts which are not in a perfect
state.
Only use genuine AMAZONE spare and wear parts, or those
approved by AMAZONEN-WERKE, so that the type approval remains
valid according to the national and international regulations. The use
of spare and wear parts from third parties does not guarantee that
they have been constructed such that they meet the requirements
placed on them.
AMAZONEN-WERKE shall accept no liability for damage caused by
the use of non-approved spare and wear parts or aids.
2.11
Cleaning and disposal
Handle and dispose of any materials used carefully, in particular
•
when carrying out work on lubrication systems and equipment,
and
•
when cleaning using solvents.
2.12
User workstation
The implement may be operated by only one person sitting in the
driver's seat of the tractor.
