Settings
136
ED 02 BAH0023.0 03.14
If the seed furrow is not closed with the correct
setting of the axial distance, the means of
working of both angled pressure rollers to each
other can be infinitely adjusted using a lever
(Fig. 150/2) after the bolted connection (Fig.
150/1) has been released. The shaped
indicator element is used as a setting aid.
Lever adjustment:
→
Upwards: increases the soil movement.
→
Downwards: reduces the soil
movement.
Fig. 150
If the possible settings of the rubber V-press rollers do not lead to the
desired results, more load should be applied to the rubber V-press
rollers [see section "Setting the load distribution of the press rollers",
Seite 132].
Example:
If at the factory settings of position "A" and load level "3", the seed
furrow is not closed, the press rollers should be loaded with 30% of
the weight at the front and 70% at the rear. Move the crank to position
"B", i.e. fasten in receptacles "b" and "c".
8.18.1
Adjusting the intermediate press roller (contour sowing unit)
The working intensity of the intermediate press roller (Fig. 151/1)
increases the higher the lever (Fig. 152/1) is locked in.
Fig. 151
Fig. 152
