Coupling and uncoupling the implement
78
ED 02 BAH0023.0 03.14
Coupling the front tank
Couple and uncouple the front tank (Fig. 62) to
the tractor based on the front tank's operating
instructions.
Fig. 62
Create a conducting connection of the front tank's cable harness
(implement plug) to the tractor ground (danger of static charging).
7.1
Coupling the implement
1. Disengage the tractor universal joint shaft,
engage the tractor parking brake, shut off
the tractor engine and remove the ignition
key.
2. Clean and grease the PTO shaft
connections on the implement and tractor
sides.
3. Insert the PTO shaft half with a freewheel
(Fig. 6371) in the PTO shaft connection of
the implement and secure it in line with the
instructions (see the PTO shaft
manufacturer's operating instructions).
Only use approved Walterscheid PTO shafts
ο
W2200, 1210 mm 1 3/8, 6-part with
freewheel (Fig. 63/1) or
ο
W2200, 1610 mm 8x32x38 with
freewheel (for tractors meeting the
Russian design).
The freewheel permits the blower fan to run
on when the PTO shaft is switched off.
In the direction of travel, the PTO shaft turns
to the right (clockwise).
4. Support the PTO shaft on the PTO shaft
support (Fig. 63/2)
Fig. 63
