General Safety Instructions
32
ED 02 BAH0023.0 03.14
2.16.4
Attached tools
•
When attaching to the three-point linkage, the linkage categories
on tractor and implement must be compatible or an adapter must
be used!
•
Take note of the manufacturer's instructions.
•
Before attaching implements to or removing them from the three-
point suspension, shift the operating equipment to a position in
which unintended raising or lowering is impossible.
•
There is a danger of crushing or shearing injury around the
three-point linkage.
•
Do not step between tractor and implement when operating the
external control for the three-point attachment!
•
The implement may be transported and towed only by the
tractors intended for this purpose.
•
There is a risk of injury when implements are coupled to and
uncoupled from the tractor.
•
There is a danger of crushing and shearing injury when
operating the support devices.
•
When mounting implements at the front or rear of a tractor, do
not exceed
ο
The approved total tractor weight
ο
The approved tractor axle loads
ο
The approved load capacities of the tractor tyres.
•
Observe the max. working load of the mounted implement and
the permissible axle loads of the tractor!
•
Always ensure that the tractor lower links are adequately locked
against sideways movement before transporting the implement.
•
The operating lever for the tractor lower links must be secured
against lowering when the implement is being towed on the road.
•
Shift all equipment into the transport position before travelling on
the road.
•
Any mounted implements and ballast weights affect the
handling, steering and braking of the tractor!
•
The front tractor axle must always be loaded with at least 20% of
the empty tractor weight, in order to ensure sufficient steering
power. Apply front weights if necessary!
•
Only ever carry out any servicing, maintenance or cleaning
operations or remedy malfunctions with the ignition key
removed.
•
Leave safety devices attached and always position them in the
protective position.
