Settings
ED 02 BAH0023.0 03.14
115
Emptying the seed hopper and sowing housing
WARNING
Only hold the spring-loaded flap (Fig. 110/2) on its handle
(Fig. 110/3), otherwise there is a risk of injury if the flap snaps
closed.
Never reach between the flap and the sowing housing with your
hand.
1. Raise the implement to the point that the
seeding coulters are clear of the ground.
2. Remove the linch pin and bolt (Fig. 109/1)
and swing the intermediate press roller
(optional) downwards.
Fig. 109
3. Place a suitable collection container (Fig.
110/1) under the sowing unit.
4. Open the spring-loaded flap (Fig. 110/2)
and empty the seed hopper.
5. Close the flap (Fig. 110/2).
Fig. 110
To completely empty the sowing housing:
6. Release the nut (Fig. 111/1).
7. Swing the spring (Fig. 111/2) to the side.
8. Open the residue emptying flap (Fig.
111/3) and empty the sowing housing.
9. Close the residue emptying flap and lock
with the spring.
10. Tighten up the nut.
Fig. 111
