47
-EN
01GB05INE-W957A.fm
ALPINE INE-W957A 68-24567Z47-A (EN)
MX Pandora
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
MX AUX/AUX3
Choose the MX mode (Compress Media, Movie, or Music) that
corresponds to the media connected.
HDMI
Choose the MX mode (Compress Media, MOVIE, or MUSIC) that
corresponds to the media connected.
•
To cancel MX mode for all music applications, set MX to “OFF” in
step 1.
•
Each music applications, such as FM radio, CD, and
MP3/WMA/AAC can have its own MX setting.
•
Setting to MX sets MX mode of each music applications to “OFF”.
•
There is no MX mode for AM radio.
•
The function is inoperable when Defeat is set to “On”.
Equalizer Presets
[EQ Presets]
is selected on the Sound setup menu in step 3. Refer to
“Sound Setup Operation” (page 45).
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
Setting item: EQ Presets
Setting contents: FLAT (Initial setting) / POPS / ROCK / NEWS /
JAZZ / ELECTRICAL DANCE / HIP HOP / EASY
LISTENING / COUNTRY / CLASSICAL
•
Only one type can be set to ON.
•
When Equalizer Presets setting is edited, a Download Sound setting
is disabled.
•
When Equalizer Presets is set, the linked Parametric EQ settings are
also changed. We recommend storing Parametric EQ settings in a
Preset in advance.
•
The Equalizer Presets setting can be configured when Defeat is
“Off”.
Adjusting the Parametric Equalizer
Curve (Parametric EQ)
[Parametric EQ]
is selected on the Sound setup menu in step 3. Refer
to “Sound Setup Operation” (page 45).
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste.
Setting item: Parametric EQ
1
Adjust the Parametric EQ to your preference.
Adjusting the Band
Touch
[Band]
to select the band to be adjusted.
•
You can select a band directly by touching the screen.
Adjusting the Frequency
Touch
[
]
or
[
]
of “Freq.” to adjust the frequency of the
selected band.
Adjustable frequency bands: 20 Hz to 20 kHz (in 1/3 octave steps)
Adjusting the Level
Touch
[
]
or
[
]
of “Level” to adjust the level of selected
band.
Setting contents: -7 to +7 (Initial setting: 0)
Setting the Bandwidth
Touch
[
]
or
[
]
of “Q Adjust” to select the bandwidth.
Setting contents: 1 (Initial setting) / 2 / 3
2
To adjust another band, repeat step 1, and adjust all
bands.
3
To store the adjusted setting value, touch and hold
[Preset1]
,
[Preset2]
, or
[Preset3]
for at least 2
seconds.
•
BAND2 and BAND8 are the same as the Bass and Treble controls.
Their Level adjustment can also be controlled by pressing and
holding
/ AUDIO and selecting Bass Level or Treble Level. Refer
to “Easy Sound Setup mode” on page 24.
•
Settings exceeding the frequency of adjacent bands are not available.
•
While adjusting the Parametric EQ, you should consider the
frequency response of the connected speakers.
•
When the parametric EQ is adjusted, the Equalizer Presets are
overridden.
•
When Equalizer Presets is set, the linked Parametric EQ settings are
also changed. We recommend storing Parametric EQ settings in a
Preset in advance.
•
Touch
[Flat]
to initialize all values.
•
The Parametric EQ setting can be configured when Defeat is “Off”.
Calling the Parametric EQ adjusted value
Calling the pre-set Parametric EQ adjusted value.
Touch
[Preset1]
,
[Preset2]
, or
[Preset3]
on the
Parametric EQ screen.
The setting stored in the Preset will be recalled.
Band1
Band2
···
Band8
Band9
Band1:
20 Hz~100 Hz (63 Hz)
Band2:
63 Hz~315 Hz (125 Hz)
Band3:
125 Hz~500 Hz (250 Hz)
Band4:
250 Hz~1 kHz (500 Hz)
Band5:
500 Hz~2 kHz (1 kHz)
Band6:
1 kHz~4 kHz (2 kHz)
Band7:
2 kHz~7.2 kHz (4 kHz)
Band8:
5.8 kHz~12 kHz (8 kHz)
Band9:
9 kHz~20 kHz (16 kHz)
01GB00INE-W957A.book Page 47 Monday, April 21, 2014 7:49 PM
Summary of Contents for INE-W957A
Page 169: ...60 2 Tap to stop the simulation...
