46
3. Select a destination from the list.
4. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
to modify route
parameters, or tap
and start your journey.
3.1.7 Entering the coordinate of the destination
You can also select a destination by entering its coordinate. Do as follows:
1. In the Navigation menu, tap
.
2. Open the
menu and tap
.
3. You can enter the latitude and longitude values in any of the following formats: decimal
degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds.
4. (optional) If necessary, tap
then
and enter
the coordinate in UTM format.
Summary of Contents for INE-W957A
Page 169: ...60 2 Tap to stop the simulation...
