Cleaning optical components
207
Goldeye G/CL Technical Manual V4.1.1
-
With a straight motion across the glass surface from one end to the
opposite end.
5. When you've finished cleaning, examine the surface in a strong light. Take an
out-of-focus picture of a flat, illuminated surface to see if any dirt or dust
remains.
6. If dust spots remain, repeat this procedure once, using new clean lens tissue
(as described above).
Figure 70: Use of cleaning tab or tissue to clean a sensor.
If dust spots remain:
If dust spots remain after cleaning twice, contact your Allied Vision distribution
partner.
