Camera interfaces
146
Goldeye G/CL Technical Manual V4.1.1
The Goldeye CL has the following LEDs on its rear panel:
•
One Camera Link status LED showing the Camera Link connection status.
•
One temperature status LED showing the sensor and camera temperature
status. See
Control of the sensor temperature on page 188
for further
explanation.
Camera Link status LED
Figure 43: Connection ports and LEDs of a Goldeye CL‐032 Cool and CL‐008 Cool
LED color and
flashing pattern
Status
Description
Booting
After powering up the camera, it indicates the boot phase
with a periodic green-red flashing.
A firmware update in progress is indicated the same way.
Green-red (1 Hz
periodic flashing)
Idle
A steady green light indicates that the camera is idle and
ready.
Green
(continuous)
Transmission
During transmission of image data, the LED toggles between
red and green. Traffic on the serial control channel is shown
by additional irregular fast green-red flashing. This may cause
the LED to appear amber colored.
Green-red (non-
periodic fast
flashing)
Temperature
Status LED
I/O Port:
External Sync IO
RS-232 TX/RX
Power port:
Camera power
Camera Link
Status LED
Camera Link Port
