The Soak Sequence
Display Mes-
sage
Default
Information
Limits
Temperature
104° F [40° C]
The water temperature.
33.8 - 113°F [1 -
45° C]
Inlet
I1-I7
The suggested inlet valves are related to the temperature and the soap
box to be used.
NOTE: If you insert other inlet valves than the suggested
ones, problems can occur at the water fill process.
I1...I8
Level
Normal Low
The suggested water level depends on the machine Type.
RPM
-
The suggested RPM depends on the machine Type.
Detergents
Menu…
Supply 1, …, 8
0 seconds
Time selection for Soap Boxes (hopper) and external liquid soap sup-
plies.
You can program up to 4 supplies at the same time. If you have pro-
grammed more then 4 supplies an error message will be generated.
Put the time of the supplies back to zero until not more than 4 non-
zero time values are remaining.
(liquid soap supplies must be switched on at the configuration menu) .
0 - 99 seconds
On Time
12 seconds
The wash action (motor "On" Time).
(The suggested default values can be adjusted at the Initialization
menu)
1 - 99 seconds
Off Time
10 minutes
The wash action (motor "Off" Time).
(The suggested default values can be adjusted at the Initialization
menu)
1 - 99 minutes
Time
1.0 Hour
The Soak Sequence Time.
(for 0 Hour the Soak sequence will be skipped) (programmable in
steps of 0.1 Hour)
0 - 25.5 Hour
Pause
No
When a signal Pause is programmed, a pause will be introduced at the
end of the Wash Step. This allows the operator to add soap for the next
step. A buzzer signal warns the operator that the cycle has been inter-
rupted.
No / Yes
Table 23
The Spray Sequence
• Prewash
• Wash
• Cooldown
• Rinse
• Final Rinse
• Soak
•
Spray
• No wash
• Water or Liquid is injected at Distribution or Low Spin
Speed .
• No standard water inlets can be programmed in this function.
• The liquid will be injected based on soap supply program-
ming.
Programming
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
54
Part No. D1631ENR7
Summary of Contents for IYG065J
Page 2: ......
