Configuration Menu
Display Mes-
sage
Default
Information
Limits
Supply Voltage
XXXXXXX
(Inverter Type)
No
Select the correct inverter.
• Look at Machine Name Plate on the rear of the washing machine.
• Select the Supply Voltage as shown on the Machine Name Plate.
The frequency inverter will be selected by default.
• Check Inverter Type.
NOTE: The washing machine can only perform properly if
the inverter contains the right list of inverter parameters. By
the wash computer it is possible to load the list of parame-
ters in the inverter. Make sure that the correct Supply Volt-
age has been selected first.
List
New Motor
Yes
Selection of motor type In 08/2018 new motor type was introduced in
production. During inverter parameters loading it must be selected cor-
rect motor type installed in machine. Only Hardmount machine 7.5kg /
20 lb /80L.
No / Yes
Load Param… Are
You Sure ?
No
NOTE: Loading parameters is only required after installing a
new inverter.
Load the inverter Parameters.
• Door must be closed.
• Check if the SETUP is correct.
• Parameter List Version
• Machine type, inverter type, softw version
• Confirm that you want to load the inverter Parameters.
• Check status screen while parameters are loaded.
• Sending Param.: 0 - 100 %
• Verify Param: 0 - 100 %
No / Yes
Total Number of In-
lets
2
A washing machine can be delivered with 2 or 3 main water Inlet sup-
plies.
A machine with 2 main water inlet supplies is prepared for:
• soft warm water
• soft cold water
A machine with 3 main water inlet supplies is prepared for:
• soft warm water
• soft cold water
• hard or recycled cold water
Depending on this selection other inlet valves will be suggested at the
final rinse sequence.
Depending on this selection other inlet valves will be programmed
when the standard programs are loaded.
2 / 3
Table 9
continues...
Initializing the Machine
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
34
Part No. D1631ENR7
Summary of Contents for IYG065J
Page 2: ......
