Alliance Laundry Systems IYG065J, Original Instructions Manual

Page: 48 / 106

This paragraph gives a detailed explanation about program-
ming the Wash Sequences.
• Each program step contains a wash part and a drain/spin part.
• First the wash part must be selected, item by item can be pro-
grammed.
• Next the drain/spin part must be selected, item by item can be
programmed. Refer to section Step 5: Programming the Drain
Step .
• Without making changes you can watch item by item, by
pressing the ARROW DOWN or UP button.
• If you want to make changes:
• Insert a new value.
• Enable or disable a Setting by pressing the CONFIRM
THE SELECTON or CANCEL THE SELECTION button.
• Select a list element by pressing the buttons LEFT or
CANCEL THE SELECTION button.
• You always need to confirm by pressing the START but-
ton.
• Each time you add or insert a new step, default values have
been pre-programmed. So with less effort, complete programs
can be programmed. Refer to
Basic Description of Controls
for a general explanation concerning the creation of wash pro-
grams.
• You can recognize a list element by the buttons LEFT and
CANCEL THE SELECTION symbol at the right side on the
display.
• The arrow down symbol on the display points to the last
Menu Item : EXIT.
Selecting the Wash Part
CFD1380R_SVG
Z
Type: Prewash
Prewash
Spin
Figure 21
• If you have selected Add Step, Edit Step or Insert Step, you
have to select the wash sequence now.
• Depending on the machine type, with top or front soap dis-
penser, you have more or less sequences available.
• Prewash
•
Wash
• Cooldown
• Rinse
• Final Rinse
• Soak
• Spray
• No wash
• For a new step, as a default, the first displayed function is the
Wash sequence.
• Now by pressing the buttons LEFT or CANCEL THE SE-
LECTION , you can select the desired sequence.
• Press the ENTER button to confirm.
• You can also use the ARROW DOWN button if you accept
the pre-programmed default value.
The Prewash Sequence
• Prewash
• Wash
• Cooldown
• Rinse
• Final Rinse
• Soak
• Spray
• No wash
The Prewash Sequence
Display Mes-
sage Default Information Limits
Temperature 104° F [40°C] The water temperature. 33.8 - 113 °F [1 -
45 °C]
Inlet I1 – I5
(104 °F
[ 40°C ])
The suggested inlet valves are related to the temperature and the soap
box to be used.
NOTE: If you insert other inlet valves than the suggested
ones, problems can occur at the water fill process.
I1...I8
Table 18 continues...
Programming
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
48 Part No. D1631ENR7